Epoxy Tube And Screw Connection Method

Jun 10, 2024 Leave a message

The connection methods of epoxy pipe and screw mainly include the following methods:

Threaded connection: This is a common connection method, which is threaded by an automatic threading machine and implements the current national standard GB/T7306. This method is suitable for application scenarios that require high sealing and connection strength.

Flange connection: Flange connection is divided into one-time installation method and two-time installation method. The one-time installation method involves on-site measurement, drawing a single-line processing diagram of the pipeline, processing and coating, lining with plastic, and then transporting to the site for installation. The two-time installation method is to use non-coated, plastic-lined steel pipes and pipe fittings on site for flange welding, assemble the pipeline, and then disassemble it for coating and plastic lining, and then transport it to the site for installation.

Groove connection: It is preferred to use finished grooved plastic-coated pipe fittings, and use a special groove rolling machine to press the groove to ensure that the groove depth meets the relevant standards (CJ/T156-2001). This connection method is suitable for occasions that require quick installation and disassembly. ‌

Socket connection: ‌Also known as flared connection, ‌By changing the sealing connection structure of the pipe connector, ‌it fundamentally solves the problem of water seepage in pipe connection. ‌This connection method is simple and convenient to construct and operate, ‌and is mainly used for threading pipelines. ‌

Bimetallic welding: ‌Also known as lining welding connection, ‌special welding prefabrication technology is used at both ends of the steel pipe to combine carbon steel and stainless steel together, ‌avoiding the damage to the coating layer of the steel pipe during welding construction. ‌This is a good connection solution for buried plastic-coated steel pipes. ‌

These connection methods have their own characteristics, ‌and which method to choose depends on factors such as specific application requirements, ‌working environment, and installation conditions1. ‌